Industrial

IND_PLANTAir Quality

DESCRIPTION
March Adams designed 6 industrial air washers, 70,000 CFM each, to condition the air and remove oil from the industrial machining process.

 

 

 

 


airqualityChiller Installation

DESCRIPTION
March Adams installed a central 1500 ton chilled water system to 6 fiber production line, while production continued.

 

 


Synthetic_Industries_01Plant Engineering Support

DESCRIPTION
One project involved the fabrication of bulkhead assemblies, pipe galleries and the interior skeleton for ocean going fuel tankers. The other project involved the construction of custom replacement tube bundles for large superheaters.

 


US_SteelOn-Site Electrical Engineering

DESCRIPTION
March Adams provided remote and on-site electrical engineering design and support for the installation of a 5 MW Generator for the U.S. Steel Plant in Birmingham, Alabama. The generator produced electrical power rated at 13.2 KV. The generator was installed in an existing generation plant and tied into the plant electrical distribution loop. Our work included wiring and terminations for the generator to the sub-station on the power side and wiring and terminations on the control side. Engineering during the design review process produced a project with minimum cost that maximized constructability in the field.


Machine Re-Design

DESCRIPTION
March Adams worked with a local manufacturing facility to redesign an old printing machine. Old custom made components were updated with readily available parts. A new support structure was designed to allow increased production speeds. The entire assembly was fabricated, assembled and tested prior to delivery.